Full scope interior execution.
From first swing of the hammer to the final piece of millwork, we handle every trade under one roof so nothing slips through the cracks. One team. One point of contact. Every scope item owned.
“Every trade. One crew. One call.”
Every trade.
Under one roof.
Demolition through final millwork, all coordinated by a single team with one point of contact and one accountable outcome.
Demolition
Complete strip outs and selective demo. We clear the way fast and clean so your project starts on the front foot, not the back one.
Walls & Ceilings
Steel framing, drywall, taping, ceiling systems. Precision work that is ready for finishing on time, every time.
Finishing
Paint, trim, flooring, final touches. This is where the design comes to life and we make sure every surface reflects the quality your client expects.
Millwork & Install
Custom millwork, cabinetry, fixtures, built ins. Placed exactly to spec with zero guesswork and zero callbacks.
Trade Coordination & Scaling
We manage the flow of multiple trades, keep schedules tight, and scale manpower when the timeline demands it. Weekend pushes, extended crews, whatever it takes. Your deadline does not move.
Specifics matter.
Here is what is included.
Other contractors list service names. We list what we actually do, because the difference between a good project and a frustrating one lives in the details.
Demolition
Full strip-outs, selective demo, hoarding installation, debris removal, bin management, rough cleaning, structural condition reporting, coordination with building management. We leave the space ready for the next trade, not just empty.
Steel Framing
Light gauge steel partition framing, door openings, backing at specified heights, header installation, blocking for wall-mounted items, coordination with MEP rough-in. Our framing crew is in-house, ensuring consistent quality and direct accountability throughout the project.
Drywall & Ceilings
Hang, tape, and multi-coat finish. Level 4 finish as standard on commercial applications. T-bar ceiling grids, bulkheads, soffits, acoustic tile, specialty ceilings. Every coat is applied and sanded to specification before the next trade steps in.
Finishing
Primer, paint (2-coat minimum), accent walls, trim installation, base and door casing, LVP and carpet flooring, tile, epoxy floors for industrial applications. Finish schedule managed against the approved specifications.
Millwork & Installation
Custom reception desks, office built-ins, break room cabinetry, credenzas, shelving, feature walls, signage substrates. Shop fabricated to spec and scheduled into the project timeline from day one so installation lands exactly when the sequence requires it.
Trade Coordination
Full MEP sequencing, sub scheduling and re-scheduling, daily site management, permit management, inspection coordination, conflict resolution, progress reporting. The work does not fall through the cracks because one person owns the whole picture.
What does commercial renovation
cost in the GTA?
This is one of the most searched questions in our industry and one of the most poorly answered. The honest answer is that cost depends on scope, condition, finishes, and timeline. Here is a framework for understanding it.
What Drives Cost Up
High plumbing density (medical, restaurant), specialty HVAC requirements, level 5 drywall finish, full custom millwork, tight timelines requiring weekend crews, phased builds in occupied spaces, extensive permit management, structural modifications, and specialty materials with long lead times.
What Drives Cost Down
Simple open-plan layouts, standard finish specifications, minimal MEP changes, good base building condition with accurate drawings, generous timelines, flexible scheduling, and early engagement that allows proper long-lead item ordering. The biggest cost savings come from planning, not cutting scope.
How VNG Quotes
Our quotes are broken out by trade, with every line item priced to actual cost. Exclusions are listed explicitly. Items that could affect scope, including slab conditions, existing MEP, and permit comments, are flagged at quote time, not after signing. You get a number you can plan around, and it does not move unless the scope moves. When scope changes are needed, you approve them in writing before we proceed.
Different spaces.
Same standard of execution.
Commercial interior renovation is not one industry; it is ten. Each has its own regulatory requirements, operational constraints, and quality standards. We have worked across all of them.
TI's, full fit-outs, shell-to-turnkey, executive spaces. We understand lease deadlines and tenant obligations.
ICRA protocols, AODA compliance, high-density plumbing, specialized HVAC, phased builds in live clinical environments.
Commercial kitchen MEP, grease traps, hood venting, health unit coordination, bar millwork, dining room finishes.
Branded fit-outs, storefront builds, tenant-specific finishes, display systems. Delivered on time so your client opens on schedule.
Mezzanines, office additions, demising walls, fire suppression, dock configurations. Industrial builds to code and on budget.
Classroom builds, library conversions, administration fit-outs, accessibility upgrades. Occupant-sensitive scheduling.
Lobby renovations, gym fit-outs, amenity spaces, party rooms. Built while the building is occupied.
Retail podiums, condo lobbies, ground-floor commercial units. Coordinated with building management and active development schedules.
Questions project managers
ask before hiring us.
Do you handle permitting?
Yes. We apply for all required permits on day one of the project, manage the permit process, book rough-in and final inspections, and close permits at project completion. Permit delays are built into our schedule assumptions where applicable.
What is the typical quote turnaround time?
We return detailed, itemized quotes within five business days of a site visit. For larger or more complex projects, we will tell you upfront if additional time is needed. We do not provide quotes without seeing the space.
Can you work in an occupied building?
Yes. We regularly execute renovations in occupied commercial buildings. We coordinate with building management, use proper hoarding and dust containment, schedule noisy work during off-hours where required, and keep common areas clear. For medical projects, we follow ICRA protocols throughout.
How do you handle scope changes mid-project?
Every scope change is documented in a formal change order with a cost impact and schedule impact before work proceeds. No verbal approvals, no surprises on the final invoice. You always know what a change will cost before we make it.
What geographic areas do you serve?
We operate across the Greater Toronto Area: Toronto, Mississauga, Brampton, Vaughan, Markham, Oakville, Burlington, Hamilton, and surrounding areas. For larger projects, we can mobilize across Ontario. Contact us to discuss your specific location.
Do you have WSIB and liability insurance?
Yes. VNG carries full commercial general liability insurance and WSIB clearance. Certificates are provided at contract signing and can be issued to your organization or property management as additional insured.
Need a commercial renovation contractor in Toronto or the GTA?
Tell us the project type, size, and location. We will walk the space and come back with a real number within five business days.
Ready to get started?
We will give you a real quote.
Not an estimate. Not an allowance-filled range. A detailed, itemized quote you can put in front of your client or landlord with confidence.
Request a Quote